-
Differenstrykblander
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
InnovDos Foam Proportioning System
InnoVfoam has developed a foam proportioning system called "InnovDos" for adding foam concentrate to mains water without needing an external energy supply. InnovDos uses a water-driven foam pump. Its main components have been tested and approved by VdS. The system is suitable for foam proportioning in large (sprinkler) systems. -
Slukningsmonitor med pendulbetjening
The InnoVfoam fire monitor type FWM was developed as compact and reliable device. The manual operation (horizontally and vertically) is done by protected handles which enables safe monitorcon- trols. The Jet/Spray nozzle can be ajusted between full jet and spray by turning the nozzle-grib. Ca- pacityadjustment can be calibrated easily in order to get the best performance regarding throw length and Jet-pattern in relation to the available waterpressure on site. If supplied together with a Waterturbine, installed at the inletflange of the FWM monitor, the rotati- on of the monitor can be done automatically on waterpressure. This additional device enables safe operation in hazardous conditions without putting people into danger. -
Manuel styret brandmonitor
The InnoVfoam fire monitor type FWM was designed as compact and reliable device. Horizontal and vertical positioning is set manually with help of levers (FWM-3/4/6) or hand wheels (FWM-8), which enable safe manual operation. The Fog/Jet nozzle type FJN can be adjusted, by hand, between full jet and spray mode. The capacity of the unit can be manually adjusted such that the best performance possible at the given water pressure in regard to throw length and jet pattern is achieved. The monitor can be equipped with a foam branch pipe or a water branch pipe. -
FiFi-1 Fjernbetjent brandvandsmonitor
The InnoVfoam FiFi-1 monitor type FWM-EL was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The unit can be supplied either with a water branchpipe, foambranchpipe or Fog/Jet nozzle type FJN which can be adjusted between full jet and spray modes by a separate electric motor. -
Medium skumgenerator
The Medium Expansion Foam Generator is a generator intended for fixed installations. Generally used for coverage of bunded and diked areas, incinerator plants, loading facilities, jetties, spill fires, control of vapor relese from toxic or flamable liquid spill or protection of loading facillities where medium expantion foam is needed. The generators are used with most types of foam systems like foam pumps, bladder tanks or In-line proportioners. The generator normally operates between 3 to 5 bar inlet pressure. -
Kraftig skumgenerator (Fixed/Portable)
The LFG, Low expansion Foam Generator is used for fixed installations. The design allows for rapid coverage of i.e. a bunded area and should be used together with a Class B foam concentrate. Due to the low expansion and the robust design the LFG is suitable for outdoor use also in harsh environment. The generators can be used with most types of foam systems like foam pumps, bladder tanks or In-line proportioners. The LFG produces a uniform heavy foam with a nominal expansion ratio of more than 10:1. -
Dyse med lavt skum
The Low expansion Foam Nozzle is designed for use in a deluge type foam sprinkler system and in- tended for use with all types of foam solutions from a separate foam proportioning system. The sprinkler has a compact and rigid construction and can be used both inside and outside; it can be mounted horizontally or vertically. -
Skumkop med skumgenerator
The InnoVfoam Tank Foam Generator (ITFG) with an integrated foam chamber and (separate) Foam Pourer (FP) is developed for extinguishing storage tank fires. In order to generate low expansion foam and spread it over the flammable liquid surface the device is provided with an integrated air foam generator. For ease of installation the flanged outlet usually is connected to a flanged nozzle which is welded into the tank-shell close to the tank top. -
Lineær glasfiberdetektion
Glas fibre detection is a revolutionary way of measuring exact temperature with help of a glas fibre detector. The reflected signal from the laser that is sent by the glass fibre is temperature sensitive and provides a precise temperature measurement on each point of the detector. With the supplied controller the detector can be devided into 256 zones and alarm criteria can be programmed per zone such as min/max temperature, rate of rise, deviation of an average etc. The system is perfectly suitable for buildings with explosion safe equipment such as chemical factories, refineries and tank terminals. Direct controlling from the fire fighting system is possible. The maximum length of 8 km offers a flexible and affordable detection device. -
Hydrantskab med skumtank og skumblander
The InnoVfoam hydrant cabinet type with foam concentrate tank and proportioner is a compact device which includes a hose reel with foam making equipment and a foam inductor with foam concentrate tank. The cabinet can be connected to a suitable water supply with sufficient water flow and pressure. The field of applications can be found within the aviation (heliports and hangars), the industry (chemical plants, refineries) and the civil sector (fuel stations, boiler rooms, auto parks). Due to the integrated foam induction, the cabinet is suitable for manual suppression of fuel fires with foam. The outstanding performance of the foam making equipment like the low expansion foam branch pipe enabled fire fighting from distance.
