-
Løftemonitor
In collaboration with Europoles Swiss, InnoVfoam BV has developed a new concept for fire monitors at height. Conventional steel towers are generally equipped with cage ladders and platforms used in performing mainte-nance work on the monitors. The InnoVfoam-Europoles concept consists of a mast made of pre-stressed concrete with a lowering mechanism fitted to the exterior. The monitor can be lowered using a sled, allowing maintenance to be conducted at ground level. -
Manuel styret brandmonitor
The InnoVfoam fire monitor type FWM was designed as compact and reliable device. Horizontal and vertical positioning is set manually with help of levers (FWM-3/4/6) or hand wheels (FWM-8), which enable safe manual operation. The Fog/Jet nozzle type FJN can be adjusted, by hand, between full jet and spray mode. The capacity of the unit can be manually adjusted such that the best performance possible at the given water pressure in regard to throw length and jet pattern is achieved. The monitor can be equipped with a foam branch pipe or a water branch pipe. -
Medium skumgenerator
The Medium Expansion Foam Generator is a generator intended for fixed installations. Generally used for coverage of bunded and diked areas, incinerator plants, loading facilities, jetties, spill fires, control of vapor relese from toxic or flamable liquid spill or protection of loading facillities where medium expantion foam is needed. The generators are used with most types of foam systems like foam pumps, bladder tanks or In-line proportioners. The generator normally operates between 3 to 5 bar inlet pressure. -
Membrantank med skumblander
The InnoVfoam bladdertank system is a system for mixing foam concentrate with water. A major advantage of the bladdertank system is that it can be installed in the main flow and subsequently doesn't need an external energy supply. The integrated water reference test option offers a functionality test without foam consumption. -
Pålidelige Skumblandere
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Pålidelige skumblandere
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Pålidelige skumblandere
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Pop-Up Dyse
Nozzle for deck integrated fire fighting system (DIFFS). Designed for installation in any deck where there is access from below for installation and to hook up water supply. The nozzle has an housing like a bulkhead pipe with lock nut and water supply connection to be installed permanently in the deck. A pop-up spray nozzle cartridge is installed in to this housing from topside. The cartridge can be removed for flushing, cleaning and pressure testing -
Pålidelige Skumblandere
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Pålidelige Skumblandere
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Skumkoncentratpumpe med vandturbindrev
The proportioning system with a water driven motor does not require any external energy sources, and is reliable and environmentally friendly. Pumps with water driven motors are mainly used for the InnoVdos, electronic proportioning systems and foam pump proportioners. -
Skumkop med skumgenerator
The InnoVfoam Tank Foam Generator (ITFG) with an integrated foam chamber and (separate) Foam Pourer (FP) is developed for extinguishing storage tank fires. In order to generate low expansion foam and spread it over the flammable liquid surface the device is provided with an integrated air foam generator. For ease of installation the flanged outlet usually is connected to a flanged nozzle which is welded into the tank-shell close to the tank top. -
Skumpumpe med dieselmotor
No additional energy source is required for driving the diesel motor. The pump with diesel motor is mainly used for the InnoVdos, electronic proportioning systems and foam pump proportioners. -
Slukningsmonitor med pendulbetjening
The InnoVfoam fire monitor type FWM was developed as compact and reliable device. The manual operation (horizontally and vertically) is done by protected handles which enables safe monitorcon- trols. The Jet/Spray nozzle can be ajusted between full jet and spray by turning the nozzle-grib. Ca- pacityadjustment can be calibrated easily in order to get the best performance regarding throw length and Jet-pattern in relation to the available waterpressure on site. If supplied together with a Waterturbine, installed at the inletflange of the FWM monitor, the rotati- on of the monitor can be done automatically on waterpressure. This additional device enables safe operation in hazardous conditions without putting people into danger. -
Sprøjtevandventilstation
The Remote Resetting, Electrically Actuated Inbal Deluge Valve is specifically designed for use in fire protection systems actuated by a remote resetting, electric detection and release system. The Inbal Automatic Water Control Valve used in this deluge system is a pressure operated, sleeve actuated, axial valve designed for use in fire protection systems. The Inbal Electrically Actuated Deluge Valve is used for automatic or manual operation. Electric activation of the Inbal deluge system requires a solenoid valve controlled by a control (fire alarm & releasing) panel either manually or by heat, smoke, or flame detectors. When the detection system operates, the control panel energizes the Solenoid Valve to open. When the Solenoid Valve is actuated either automatically or manually, or when a manual release station is operated locally or by remote, the Inbal Deluge Valve opens to flow water from all open sprinklers and/or nozzles on the system. After operation, the Inbal Valve can be reset by remote control, saving the need to approach the Deluge Valve for resetting. -
Tør alarmventilstation
The Inbal Dry Pipe Valve is specifically designed to control the flow of water to the dry pipe sprinkler system and to provide actuation of fire alarms when the system operates. The Inbal Dry Pipe Valve is used to separate the watersupply from the dry pipe sprinkler system, by providing a bubble tight seal as long as the valve is in a set position. The Inbal Automatic Water Control Valve which is used in this dry pipe system is a pressure operated, sleeve actuated, axial valve designed for use in fire protection systems. The trim design allows low air pressure supply to control a higher water supply pressure. -
Trykreduktionsventil
The Inbal Pressure Reducing Valve series 700D-01R01 is specifically designed for pressure regulating applications in fire protection systems. The Inbal 700D-01R01 Valve automatically reduces a higher inlet pressure to a preset delivery pressure, which remains steady and unaffected by the variations or fluctuations in the inlet line pressure. The series 700D-01R01 consists of the Inbal Valve which is a pressure operated, sleeve actuated, axial valve and a pressure reducing pilot control. The Inbal Pressure Reducing Valve maintains the downstream pressure within a narrow pressure range. If the downstream pressure changes slightly the pilot control responds immediately to modulate the Inbal Valve for the preset pressure. -
Trykskumrør
The High Backpressure Foam Generator (HBG) is a generator intended for fixed installation. Generally used for subsurface and semisubsurface foam application in storage tanks containing flammable liquids. The generators are used with most types of foam systems like foam pumps, bladder tanks or in-line proportioners. The HBG is designed to introduce air into a water/foam-concentrate mix and is always made according to customer needs. -
Inbal Vandkontrolventil
The Inbal Automatic Water Control Valve series 700DX is a pressure operated, sleeve actuated, axial valve, designed from basic concepts, with a built-in actuator, to function as a control valve in fire protection systems. The Inbal series 700DX is used as deluge, preaction, dry pipe, remote control, pressure reducing, and in other types of control valves. The standard material Inbal Valve is rated to 300 psi (21 bar) and requires a minimum line pressure of 20 psi (1.5 bar) for operation. Upon removal of the control pressure, the Inbal Valve opens instantaneously, yet very smoothly, to prevent any water hammer in the piping system. The Inbal 700DX performance and ease of resetting are not affected by vertical or horizontal installation. -
Vandret blæsetank
The InnoVfoam bladdertank system is a system for mixing foam concentrate with water. A major advantage of the bladdertank system is that it can be installed in the main flow and subsequently it doesn't need an external energy supply. The integrated water reference test option offers a func- tionality test without foam consumption. -
Vandstationsventilstation med trykregulering
The Inbal Pressure Control, Remote Resetting, Electrically Actuated Deluge Valve is specifically designed for use in fire protection systems which require pressure control, actuated by a remote resetting electric detection and release system. The Inbal Pressure Control, Electrically Actuated Deluge Valve, when in operation, automatically reduces a higher inlet pressure to a preset delivery pressure which remains steady and unaffected by the variations or fluctuations in the inlet line pressure.
