-
Electric Fire Monitor
The InnoVfoam fire monitor type FWM-EL was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle type FJN can be adjusted between full jet and spray modes by a separate electric motor. The capacity of the unit can be adjusted such that the best performance possible at the given water pressure in regard to throw length and jet-pattern is achieved. -
Lift monitor
In collaboration with Europoles Swiss, InnoVfoam BV has developed a new concept for fire monitors at height. Conventional steel towers are generally equipped with cage ladders and platforms used in performing mainte-nance work on the monitors. The InnoVfoam-Europoles concept consists of a mast made of pre-stressed concrete with a lowering mechanism fitted to the exterior. The monitor can be lowered using a sled, allowing maintenance to be conducted at ground level. -
Reliable Proportioners
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Fluorinated foam concentrate
In order to make water suitable for extinguishing flammable liquids (Class B fires), a fixed percentage of foam concentrate is added. The foam formed by mixing in air can be used as an extinguishing agent. In order to make water more effective in extinguishing combustible solid materials (Class A fires), a low percentage of foam concentrate is added to increase its penetration power. -
Electronic foam Proportioning system
Accurate foam proportioning is critical in fire fighting applications. Regulations such as NFPA-11 show different ways for inducing foam concentrate at a foam fire fighting system. The innoVfoam Electronic Foam Proportioning System (EFPS) meets NFPA-11 regulations. This system is accurate, simple, compact and suitable for any type o foam concentrate or system. It’s wide flow range makes is suitable for both sprinkler and deluge applications. Thanks to our special InnoVfoam software, the system operates without dedicated electronically operated control valves. Special flow meter-operated speed control, combined with a VdS-approved gear pump, guarantees accurate operation within range. -
Pop-Up Nozzle
Nozzle for deck integrated fire fighting system (DIFFS). Designed for installation in any deck where there is access from below for installation and to hook up water supply. The nozzle has an housing like a bulkhead pipe with lock nut and water supply connection to be installed permanently in the deck. A pop-up spray nozzle cartridge is installed in to this housing from topside. The cartridge can be removed for flushing, cleaning and pressure testing -
Balanced Pressure Proportioner
Various types of foam proportioners for precisely proportioning foam concentrate in the water-stream of an extinguishing system can be used. The choice of proportioner depends on a number of factors: the type of extinguishing system, the required capacity, and the available energy, space (inside/outside/size) and pressure. -
Medium Expansion Foam Generator
The Medium Expansion Foam Generator is a generator intended for fixed installations. Generally used for coverage of bunded and diked areas, incinerator plants, loading facilities, jetties, spill fires, control of vapor relese from toxic or flamable liquid spill or protection of loading facillities where medium expantion foam is needed. The generators are used with most types of foam systems like foam pumps, bladder tanks or In-line proportioners. The generator normally operates between 3 to 5 bar inlet pressure. -
Low expansion Foam Generator (Fixed/Portable)
The LFG, Low expansion Foam Generator is used for fixed installations. The design allows for rapid coverage of i.e. a bunded area and should be used together with a Class B foam concentrate. Due to the low expansion and the robust design the LFG is suitable for outdoor use also in harsh environment. The generators can be used with most types of foam systems like foam pumps, bladder tanks or In-line proportioners. The LFG produces a uniform heavy foam with a nominal expansion ratio of more than 10:1. -
Low expansion Foam Nozzle
The Low expansion Foam Nozzle is designed for use in a deluge type foam sprinkler system and in- tended for use with all types of foam solutions from a separate foam proportioning system. The sprinkler has a compact and rigid construction and can be used both inside and outside; it can be mounted horizontally or vertically. -
Tank Foam Generator
The InnoVfoam Tank Foam Generator (ITFG) with an integrated foam chamber and (separate) Foam Pourer (FP) is developed for extinguishing storage tank fires. In order to generate low expansion foam and spread it over the flammable liquid surface the device is provided with an integrated air foam generator. For ease of installation the flanged outlet usually is connected to a flanged nozzle which is welded into the tank-shell close to the tank top.
